2009 Track - Tub Grinder - Overview
2009 Track Tub Grinder General Specifications
  Total 30,000 lbs. (13,608 kg)
  Transport Width 8 ft. 6 in. (2.59 m)
  Transport Length 27 ft. 5 in. (8.36 m)
  Transport Height w/ Tub Cover 129.85 in. (329.82 cm)
  Engine Caterpillar 325 HP C9 Electronic Diesel
  Clutch PT Tech HPTO-12
  Governor Electro-Hydraulic Load Sensing
  Safety Switches Safety Shutdown
  Electrical 24 volt machine
  Fuel Capacity 100 Gallons (378.5 Liters)
  Hydraulic Oil Capacity 50 Gallons (189.3 Liters)
  Tub Width 9 ft. 6-3/8 in. (2.91 m) at Flare
  Depth 3 ft. 4 in. (1.02 m)
  Tub Diameter at Base 7 ft. 6 in. (2.27 m)
  Tub Wall 3/16 in. (.476 cm) Thick
  Tub Floor 1/4 in.(.635 cm) Thick
  Tub Drive Hydraulic Orbit Motor
  Tub Speed Sensor Electronic Self Governing
  Stacking Conveyor 11 ft. 6 in. (3.5 m) Long Top Drive X 24 in. (60.96 cm) Wide X 8" (20.3 cm) Depth
  Belly Conveyor 30 in. (76.2 cm) Wide /w a V Cleat
  Hammers 20 Fixed Single Bolt Hammers, or 36 Swing Hammers
  Length 40 in. (101.6 cm)
  Cylinder Shaft 4-1/2 in. (11.43 cm) Stress Proof Steel
  Cylinder Plates 16 in. (40.64 cm) Diameter X 1-1/2 in. (3.81cm) Thick
  Hammermill Opening 41 in. (104.14 cm) X 25 in. (63.5 cm)
  Screens 1 in. (2.54 cm) Thick Split Screens
  Hammer Rods 1-1/2 in. (3.81 cm) Diameter
  Bearings 3-1/2 in. (8.89 cm) Pillow Block Bearings
  Hammermill Drive Direct Drive Torque Limiter
2009 Track Tub Grinder Options
Hammer Options: (Must choose one)
  (40) Swing Hammers
(20) Fixed Hammers
Screen Options: (Must choose one)
  Screen 1" Hole 1/2" Thick Hardox w/ Doubler
Screen 1 1/2" Hole 1/2" Thick Hardox w/ Doubler
Screen 2" Hole 1" Thick
Screen 3" Hole 1" Thick
Screen 4" Hole 1" Thick
Screen 4 3/4" x 7" Hole 1" Thick
Screen 6" x 9" Hole 1" Thick
Discharge Conveyor Drive Roller: (Must choose one)
  Magnetic Roller Complete w/ Aluminum Deflector Chute
11' 6" Compact Stacking Conveyor
The Standard 21' 6" Stacking Conveyor
Remote Control Option: (Must choose one)
  No Remote Control
6 Function Tub: Start, Stop, Rev Cnvyr: Up, Down Eng: Kill
6 Function plus Cover: Raise, Lower
Tub Cover
  An operational characteristic of all grinders is that objects may be thrown out of the tub. Tub Covers reduce the risk of potential injury or property damage from thrown objects. Proper use of the Tub Cover provides the operator with a means to help control the area over which thrown objects may fall. Combined with a decrease in the percentage of objects thrown from the tub, the Tub Cover is an effective means of reducing risk to personnel and property.
DuraTech Industries International, Inc. reserves the right to change its products or their specifications at any time without notice or obligation. Illustrations, specifications, and descriptions contained herein were accurate at the time of publication, but are subject to change without notice. Illustrations may include optional equipment and accessories, and may not include all standard equipment.