2009 Electric - Tub Grinder - Overview
2009 Electric Tub Grinder General Specifications
 |
||
| GENERAL SPECIFICATIONS | ||
| Motor-Main Drive | 400hp/380V/60HZ- South Korea Only | |
| Motor-Hydraulic Drive | 75hp/380V/60HZ- South Korea Only | |
| Motor-Main Drive | 400hp/380V/50HZ | |
| Motor-Hydraulic Drive | 75hp/380V/50HZ | |
| Motor-Main Drive | 400hp/4600V/60HZ | |
| Motor-Hydraulic Drive | 75hp/460V/60HZ | |
| Hydraulic Oil Capacity | 50 Gallons (189.3 Liters) | |
| Tub Governor | Electro-Hydraulic Sensing | |
| Tub Speed Sensor | Magnetic Sensor | |
| Tub Width | 9’ 6-3/8” (2.91 m) at Flare | |
| Tub Depth | 40” (1.02 m) | |
| Tub Diameter at Base | 7’ 6” (2.27 m) | |
| Tub Wall | 3/16” (.476 cm) Thick | |
| Tub Floor | 1/4” (.635 cm) Thick | |
| Tub Drive | Hydraulic Orbit Motor | |
| Safety Switches | Tub Tilt in relationship to Hammermill operation | |
| Belly Conveyor | 30” (76.2 cm) Wide | |
| Discharge Conveyor | 21’ 6” (6.55 m) Top Drive L- 24” (60.96 cm) Wide | |
| Hammermill Opening | 41” x 25” (104.14 cm x 63.5 cm) | |
| Hammermill Drive | Belt and pully through Torque Limiter | |
| Rotor Length | 40” (101.6 cm) | |
| Rotor Plates | 16” (40.64 cm) in Diameter 1” (2.54 cm) Thick | |
| Rotor - Shaft Diameter | 4-1/2” (11.43 cm) Stress Proof Steel | |
| Bearings | 3-1/2” (8.89 cm) Pillow Block Bearings | |
| Hammer Rods | 1-1/2” (3.43 cm) Diameter | |
| Hammers | 20 Fixed Single Bolt, or 40 swinging hammers | |
| Screens | 1” (2.54 cm) Thick Split Screens | |
| Screen area | 2,240 Sq in (14,451.6 sq cm) | |
| SKID UNIT-SPECIFICATIONS | ||
| Weight: | With 460 volt motor 29,020 lbs. (1,163.25 kg) approximate With 380 volt motor 30,120 lbs. (13,662.2 kg) approximate |
|
| Transport Width | 8’4” (2.55 m) | |
| Length | 26’6” (8.07 m) | |
| Height | 10’10” (3.29 m)/td> | |
| MOBILE UNIT-SPECIFICATIONS | ||
| Width: | With 460 volt motor 30,520 lbs. (13,843.64 kg) With 380 volt motor 31,620 lbs. (14,434 kg) |
|
| Transport Width | 8’4” (2.55 m) | |
| Length | 30’5” ( 9.28 m) | |
| Height | 10’10” (3.29 m) | |
| Axle | Tandem axles, 25,000 lbs (11,339.01 kg) | |
| Tires | (4) 445/50 R 22.5 Super Single | |
| Tongue Weight | 6,340 lbs (2,876 kg) | |
| Brakes | Air or Optional 24 Volt Electric | |
| Electrical-trailer | 12 Volt / 24 Volt | |
| Lights | Clearance, Directional and Brake | |
2009 Electric Tub Grinder Options
| Machine Configuration Options (Must choose one) | ||
| Skid Unit Mobile Unit |
||
| Hammer Options: (Must choose one) | ||
| (40) Swing Hammers (20) Fixed Hammers |
||
| Screen Options: (Must choose one) | ||
| Screen 1" Hole 1/2" Thick Hardox w/ Doubler Screen 1 1/2" Hole 1/2" Thick Hardox w/ Doubler Screen 2" Hole 1" Thick Screen 3" Hole 1" Thick Screen 4" Hole 1" Thick Screen 4 3/4" x 7" Hole 1" Thick Screen 6" x 9" Hole 1" Thick |
||
| Hitch Options: (Must choose one) | ||
| Pintle Hitch with Air Brakes Pintle Hitch with optional Electric Brakes |
||
| Discharge Conveyor Drive Roller: (Must choose one) | ||
| Top Drive Roller Magnetic Roller 21' 6" Conveyor |
||
| Remote Control Option: (Must choose one) | ||
| No Remote Control 6 Function Tub: Start, Stop, Rev Cnvyr: Up, Down Eng: Kill 6 Function plus Cover: Raise, Lower |
||
| Tub Cover | ||
| An operational characteristic of all grinders is that objects may be thrown out of the tub. Tub Covers reduce the risk of potential injury or property damage from thrown objects. Proper use of the Tub Cover provides the operator with a means to help control the area over which thrown objects may fall. Combined with a decrease in the percentage of objects thrown from the tub, the Tub Cover is an effective means of reducing risk to personnel and property. | ||
