2009 - Tub Grinder - Overview
2009 Tub Grinder General Specifications
 |
||
| WEIGHT | ||
| Total | 20,840 lbs. (9,542.86 kg) | |
| TRANSPORT DIMENSIONS | ||
| Transport Width | 8 ft. 6 in. (2.59 m) | |
| Transport Length | 27 ft. 5 in. (8.36 m) | |
| Transport Height w/ Tub Cover | 129.85 in. (329.82 cm) | |
| ENGINE AND TRANSMISSION | ||
| Engine | Caterpillar 325 HP C9 Electronic Diesel | |
| Clutch | PT Tech HPTO-12 | |
| Governor | Electro-Hydraulic Load Sensing | |
| Safety Switches | Safety Shutdown | |
| CHASIS FEATURES | ||
| Axle | 25,000 lbs. (11,339 kg) Single Axle | |
| Electrical | 12 volt machine | |
| Tires | (4) 255/70R X 22.5 | |
| Tounge Weight | 6,000 lbs. (2,727 kg) Pintle Hitch | |
| Fuel Capacity | 100 Gallons (378.5 Liters) | |
| Hydraulic Oil Capacity | 50 Gallons (189.3 Liters) | |
| Lights | Clearance, Directional | |
| Brakes | Air | |
| TUB | ||
| Tub Width | 9 ft. 6-3/8 in. (2.91 m) at Flare | |
| Depth | 3 ft. 4 in. (1.02 m) | |
| Tub Diameter at Base | 7 ft. 6 in. (2.27 m) | |
| Tub Wall | 3/16 in. (.476 cm) Thick | |
| Tub Floor | 1/4 in.(.635 cm) Thick | |
| Tub Drive | Hydraulic Orbit Motor | |
| Tub Speed Sensor | Electronic Self Governing | |
| CONVEYORS | ||
| Discharge Conveyor | 21 ft. 6 in. (6.55 m) Long Top Drive X 24 in. (60.96 cm) Wide | |
| Belly Conveyor | 30 in. (76.2 cm) Wide /w a V Cleat | |
| HAMMERMILL | ||
| Hammers | 20 Fixed Single Bolt Hammers, or 36 Swing Hammers | |
| Length | 40 in. (101.6 cm) | |
| Cylinder Shaft | 4-1/2 in. (11.43 cm) Stress Proof Steel | |
| Cylinder Plates | 16 in. (40.64 cm) Diameter X 1-1/2 in. (3.81cm) Thick | |
| Hammermill Opening | 41 in. (104.14 cm) X 25 in. (63.5 cm) | |
| Screens | 1 in. (2.54 cm) Thick Split Screens | |
| Hammer Rods | 1-1/2 in. (3.81 cm) Diameter | |
| Bearings | 3-1/2 in. (8.89 cm) Pillow Block Bearings | |
| Hammermill Drive | Direct Drive Torque Limiter | |
2009 Tub Grinder Options
| Hammer Options: (Must choose one) | ||
| (40) Swing Hammers (20) Fixed Hammers |
||
| Screen Options: (Must choose one) | ||
| Screen 1" Hole 1/2" Thick Hardox w/ Doubler Screen 1 1/2" Hole 1/2" Thick Hardox w/ Doubler Screen 2" Hole 1" Thick Screen 3" Hole 1" Thick Screen 4" Hole 1" Thick Screen 4 3/4" x 7" Hole 1" Thick Screen 6" x 9" Hole 1" Thick |
||
| Hitch Options: (Must choose one) | ||
| Pintle Hitch Fifth Wheel Hitch Air Brakes W/Fifth Wheel Hitch Fifth Wheel Hitch Air Brakes W/Goose Neck Hitch |
||
| Discharge Conveyor Drive Roller: (Must choose one) | ||
| Top Drive Roller Magnetic Roller 21' 6" Conveyor |
||
| Remote Control Option: (Must choose one) | ||
| No Remote Control 6 Function Tub: Start, Stop, Rev Cnvyr: Up, Down Eng: Kill 6 Function plus Cover: Raise, Lower |
||
| Tub Cover | ||
| An operational characteristic of all grinders is that objects may be thrown out of the tub. Tub Covers reduce the risk of potential injury or property damage from thrown objects. Proper use of the Tub Cover provides the operator with a means to help control the area over which thrown objects may fall. Combined with a decrease in the percentage of objects thrown from the tub, the Tub Cover is an effective means of reducing risk to personnel and property. | ||
