The TC-15 can be equipped with either a 3" Pintle or 2-5/16" Ball hitch. Either hitch includes a safety chain and breakaway brake switch for added safety.
PATENTED AUTOMATED IN-FEED SYSTEM
The patented automated in-feed system sensor is located at the top of the hopper. After sensing the height of the log, the feed wheel will automatically adjust the feed wheel to allow larger logs to enter more easily.
360 DEGREE ROTATING DISCHARGE SPOUT
The TC-15 is equipped with a flexible discharge system that features a 360 degree, hydraulic rotation and an adjustable chip spout.
PT TECH HPTO WET MICROPROCESSOR CONTROLLED CLUTCH
PT Tech HPTO wet microprocessor controlled clutch with 4-groove belt system. The HPTO Clutch provides easy startups and provides torque overload protection for the disc, engine and driveline. For maximum control and protection the clutch comes with a clutch control interface.
FEED ROLLER W/ ADJUSTABLE SPRING-LOAD, PATENTED AUTOMATED IN-FEED SYSTEM
The feed roller is equipped with adjustable, dual spring-loaded down-pressure, which continually applies optimum downforce on material flow. The patented automated in-feed system allows the operator to walk away as the auto feed governing system handles feeding. It is also equipped with hydraulics to lift the feed roller if required.
DUAL CONTROL PANELS
Control panels are accessible on both sides of the hopper. Each control panel contains an emergency stop button. An emergency bumper bar is also located on either side of the hopper for instant shut-off of the feed wheel.
OPTIONAL GATHERING WINCH
The optional gathering winch hydraulically helps pull larger logs up to the hopper. Free wheeling discharge allows for easier unrolling of winch.
CAT C4.4 DIESEL ENGINE
With a CAT C4.4 129 hp (96 kw) and a PT-Tech clutch, the powerful TC-15 can grind trees and limbs up to 15 inches in diameter.
10,000 LBS JACK
The TC-15 features a jack with a 10,000 lbs (4,536 kg) capacity.
40 GALLON FUEL / 25 GALLON HYDRAULIC OIL
The TC-15 features a 40 gal. (152 L) fuel capacity and a 25 gal (95 L) hydraulic oil capacity.
48 INCH CHIPPING DISC
The chipping disc is 48” in diameter and 2” thick. There are four 9-1/4” knives in two locations on the disc. Four kickers help to discharge material from disc area. A convenient service lock pin holds the disc solid while servicing the knives on the disc.
8,000 LBS TORFLEX AXLE W/ ELECTRIC BRAKES
The TC-15 comes equipped with a 8,000 lbs (3,629 kg) torflex axle with an electric braking system.
EASY ACCESS TO THE ANVIL
The TC-15 is designed with easy access to the anvil. The anvils are made of ½” AR 400 steel plate and each has four cutting edges.