5064 Track- Horizontal Grinder - Overview
5064 Track Horizontal Grinder General Specifications
 |
||
| WEIGHT | ||
| Total Weight | 80,000 lbs. (36,287.4 kg) | |
| TRACK SYSTEM | ||
| CAT 320 L Track System | 20" (50.8 cm) Wide x 15' (4.6 m) Long Steel Track | |
| MACHINE DIMENSIONS | ||
| Transport Width | 9 ft. 10 in. (3 m) | |
| Transport Height | 11 ft. 5 in. (3.48 m) | |
| Transport Length | 37 ft. 8 in. (11.48 m) | |
| DRIVE SYSTEM | ||
| Engine: | Caterpillar C-18 630 HP (470 kw) Diesel Engine
Caterpillar C-15 540 HP (403 kw) Diesel Engine Caterpillar C-15 475 HP (354 kw) Diesel Engine |
|
| Clutch | HPTO 14 TD Wet Clutch | |
| Fuel Capacity | 300 Gallons (1,135 L) | |
| Hydraulic Oil Capacity | 145 Gallons (548.9 L) | |
| Rotor Drive | 4 Groove Belt | |
| FEED SYSTEM | ||
| Hopper Capacity | 197 Cubic Ft. (5.59 cu. m) | |
| Hopper Width | 61-1/2 in. (156.2 cm) Bottom, 74 in. (187.7 cm) Top | |
| Hopper Length: | 13 ft. 2 in. (4.01 m) | |
| Hopper Depth | 35 in. (88.9 cm) | |
| Feed Opening | 61-1/2 in. X 35 in. (156.2 cm x 88.9 cm) | |
| Hopper Loading Height | 96 in. (234.8 cm) | |
| Feed Roller | 36 in. (91.44 cm) dia. | |
| GOVERNING SYSTEM | ||
| Load Speed Sensor | Programmable Logic Controller | |
| The PLC (Programmable Logic Controller) regulates feed rate based on rotor speed. Feed rate is proportional to rotor speed. Maximum feed rate is adjustable. Hammermill weight consists of shaft, hammer rods, bits, hardware, and tool holders. | ||
| HAMMERMILL | ||
| Weight | 8,550 lbs. (3,878 kg) | |
| Rotor Bearing Diameter | 4-7/16 in. (11.27 cm) | |
| Rotor Shaft | 7 in (17.78 cm) Alloy Steel | |
| Rotor Width | 64 in. (162.6 cm) | |
| Rotor Plates | 32-1/4 in. (81.92 cm) dia. X 1-1/2 in. (3.81 cm) Thick | |
| Tip Swing Diameter | 41 in. (104.14 cm) | |
| Number of Hammers | 32 Single Bolt | |
| Hammer Rods | (16) - 2 in. (5.08 cm) dia. | |
| SCREENS | ||
| Screen Area | 3,705 sq. in. (2.39 sq. m) | |
| Hole Sizes | Available in a variety of sizes | |
| BELLY CONVEYOR | ||
| Length | 22 ft. (6.71 m) | |
| Width | 54 in. (137.2 cm) | |
| STACKING CONVEYOR | ||
| Length | 13 ft. (4.06 m) | |
| Width | 48 in. (121.92 cm) | |
| OTHER | ||
| Electrical | 24V | |
| Lights | Clearance, Directional | |
| OPTIONS | ||
| Air Compressor | Available | |
| Magnetic Roller | Available | |
5064 Track Horizontal Grinder Options
| Magnetic Discharge Roller: | ||
| Magnetic roller on top drive roller and aluminum discharge slide | ||
| Remote Control | ||
| 19 function remote control allows the operator to have complete control of the grinder while operating support equipment. | ||
