48” WIDE BY 26’ LONG OSCILLATING STACKING CONVEYOR
The 48” (121.92 cm) Wide by 26’ (7.95 m) Long Stacking Conveyor allows the operator to load material into a truck or onto an existing pile. Additionally, the stacking conveyor swings 40 degrees from side-to-side. An optional Magnetic Roller and Aluminum Chute removes ferrous metal from the finished product.
COMMAND CONSOLE WITH OPTIONAL REMOTE CONTROL
The Model 5064 Command Console features master engine controls, gauges, and shutoff. Also included on the command console are electric over hydraulic controls for the clutch, governor, and stacking conveyor. The optional 19 function remote control allows the operator to have complete control of the grinder while operating support equipment.
CATERPILLAR DIESEL ENGINE W/ ENCLOSED ENGINE COMPARTMENT
The 5064 is available with your choice of CAT engines to meet your grinding needs. Choose from 475 HP (354 kw), 540 HP (403 kw), or 630 HP (470 kw), all with a HPTO 14 TD wet clutch for your specific requirements of productivity and efficiency. The engine is housed in an enclosed engine compartment to protect the engine from debris and reduce noise levels.
ROTARY SELF-CLEANING SCREEN
In order to provide constant clean air to the engine and radiator the 5064 employs a Rotary Self-Cleaning Screen. The Rotary Self-Cleaning Screen reduces maintenance, provides easy access to the radiator for servicing, and allows for flexible positioning of the grinder.
HYDRAULIC FEED DOOR
The Model 5064 Heavy Duty midsized horizontal grinder is equipped with a Hydraulic Feed Door for easy loading and safer grinding.
4 GROOVE BELT DRIVE
The 4 Groove Belt Drive connects the wet clutch to the hammermill.
64” HAMMERMILL
The Model 5064 horizontal grinder is equipped with a 64” (162.56 cm), 8,850 pound (3,878 kg) Hammermill that utilizes 32 single bolt hammers for superb grinding performance.
SELF GOVERNING FLOOR APRON AND FEED ROLLER
The hammermill is fed by a Self Governing Floor Apron and Feed Roller through a 61-1/2” (156.2 cm) wide X 35” (88.9 cm) high feed opening. The programmable logic speed control (PLC) governs the product flow through the 13’2” (4.01m) 197 Cubic Foot (5.59 Cubic Meter) feed hopper for maximum grinding efficiencies.
FOUR HYDRAULIC STABILIZER LEGS
The 5064 is equipped with four hydraulic sabilizer legs to provide a rock-steady platform while grinding.
54" BELLY CONVEYOR
The 54" belly belt provides fast removal of ground product from under the Hammermill/screens.
PT-TECH HPTO-14 WET CLUTCH
The Model 5064 horizontal grinder is equipped with a self adjusting PT-TECH HPTO-14 wet clutch that provides easy push button startup. This clutch is microprocessor controlled with a built-in torque limiter and brake that provide superior protection for the engine and drive line.
jQuery Slideshow