PROVEN PT-TECH TORQUE LIMITER
The Model 2009 Electric industrial tub grinder is equipped with the proven self adjusting PT-TECH torque limiter that protects the motor and hammermill from overloads, and costly repairs.
SUPER SINGLE TIRES ON TANDEM AXLES
The 2009 Electric mobile unit comes equipped with 25,000 lbs (11,339kg) tandem axles, a pintle hitch, (4) 445/50 r 22.5 super single tires, air or optional 24 Volt electric brakes. The mobile unit is alsoequipped with clearance, directional, a brake lights.
ENERGY EFFICIENT 75 HP ELECTRIC MOTOR RUNS THE HYDRAULICS
The 2009 Electric utilizes either an energy efficient 75 HP / 380 Volt / 50 HZ motor or a 75 HP / 460 Volt / 60 HZ to run all the grinder hydraulics including the tub drive.
HEAVY DUTY HIGH PERFORMANCE 40” ROTOR
The Model 2009 Electric industrial tub grinder is equipped with a 40” (101.6 cm) rotor mounted on a 4-1/2” (11.43 cm) stress proof steel shaft with 3-1/2” (8.89 cm) pillow block bearings. The dynamically balanced rotor may be used with either 20 fixed hammers or 40 swinging hammers.
SOFT START FOR THE 75 HP MOTOR
The Model 2009 Electric industrial tub grinder utilizes a soft start for the 75 HP electric hydraulic drive motor.
HIGH POWER AND LOW MAINTENANCE PROVIDED BY THE 400 HP ELECTRIC MAIN DRIVE MOTOR
The 2009 Electric utilizes either a high power, low maintenance 400 HP / 380 Volt / 50 HZ or a 400 HP / 460 Volt / 60 HZ motor to run the main drive.
CONVENIENT SECONDARY REAR CONVEYOR CONTROLS
Secondary conveyor controls located at the base of the conveyor on the left hand side of the machine provide operating convenience and flexibility.
ENERGY SAVING SOFT START FOR THE 400 HP MOTOR
The Model 2009 Electric industrial tub grinder utilizes an energy saving soft start for the 400 HP main drive electric motor.
CONVENIENTLY LOCATED COMMAND CONSOLE WITH OPTIONAL REMOTE CONTROL
The Model 2009 Electric Command Console features master motor controls for both the 75 HP and 400 HP electric motors, gauges, and shutoff. Also included on the command console are electric over hydraulic controls for the optional tub cover, tub tilt, governor, and stacking conveyor. The optional 6 function Remote controls; engine stop, tub rotation, stacking conveyor and optional tub cover.
EASY TO READ HYDRAULIC GAUGES
Large easy to read hydraulic gauges are located on the left side at the center of the machine as viewed when facing the hitch from the rear of the machine. Gauges show Tub Drive Pressure, Conveyor Drive Pressure and Auxiliary Hydraulic Pressure.
CONVENIENT SECONDARY REAR CONVEYOR CONTROLS
The 24” (60.96 cm) Wide by 21’ 6” Long Top Drive Stacking Conveyor allows the operator to load material into a truck or onto a pile up to 16’ (4.88 m) high. The optional Magnetic Roller and Aluminum Chute removes ferrous metal from the finished product to provide a clean end product.
OPTIONAL SKID MOUNT AVAILABLE FOR PERMANENT INSTALLATION
Duratech offers you the option of having the 2009 electric in a mobile unit configuration if you have more than one grinding location that you need to move the unit between , or the skid mounted 2009 electric is available for a permanent location.
jQuery Slideshow